Results 1 to 2 of 2

Thread: Need help building a door

  1. #1
    Newbie
    Joined
    Mar 2019
    From
    Olympia Wa
    Posts
    1

    Need help building a door

    Hi... Iím a stay at home mom who works by builds different styles of doors and Iím having a hard time replicating this. I thought the board used was a 1x3 (actual width is 2.5Ē) and the cut i thought was at 45*. My issue is getting the areas thatís are circled to line up. I need it to come to a triangle point again. I was never good with geometry but if you are that would be an amazing help. Using a 1x4 (actual width is 3.5Ē) i was able to get it to come to a point at the right spot BUT It doesnít allow enough room on the sides for 3 rhombus shapes, only 1.5. So it only works in one direction. Hope that makes sense. Open to feed back if any one knows a formula I could use or suggestions! Thanks!
    Attached Thumbnails Attached Thumbnails Need help building a door-7d94c130-5c93-4161-821c-49815af87c9d.jpeg   Need help building a door-2d2199bc-198e-423c-a222-713c4f526379.jpeg  
    Follow Math Help Forum on Facebook and Google+

  2. #2
    MHF Contributor
    Joined
    Nov 2013
    From
    California
    Posts
    6,457
    Thanks
    2818

    Re: Need help building a door

    you're relying on rough cut dimensions?

    I'd think you'd have to work the thing out on paper, gen a cut list, and probably have to hand plane your pieces to exact size.
    Follow Math Help Forum on Facebook and Google+

Similar Math Help Forum Discussions

  1. [SOLVED] Show that no force can open the door?
    Posted in the Advanced Applied Math Forum
    Replies: 1
    Last Post: Jun 18th 2009, 12:07 PM
  2. Which door?
    Posted in the Math Challenge Problems Forum
    Replies: 4
    Last Post: Nov 27th 2006, 05:16 PM

/mathhelpforum @mathhelpforum